Interrupteur de guidon Tommaselli Modern gauche

Left side handlebar switch assembly original Domino-Tommaselli suitable for several motorcycles models: compatible with standard handlebars diameter 22mm. This electrical switch is complete with wires 55cm long and 9 pin Molex connector. This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through.

Functions:

• horn with push button
• winkers with 3 static positions on/off/on
• lights with 3 static positions high/low/off and 1 push button for flashing light
• engine stop with 2 static positions on/off

Dimensions:

• width: 45mm
• depth: 68mm
• height: 76.58mm

Tip: check your wiring harness and make sure the connectors will work. It's common for the starter button's on these bikes to wear out due to arcing or they can break for various reasons: corrosion and cracked solder joints on the stock switch make for an unreliable and unsafe switch. If you use an aftermarket handlebar please make sure that wire harness is long enough.